No further information available.
Home » Product Range » Nem kategorizált » -15 » VMI X-Balancer+ balancer instrument
2-channel handheld instrument/measuring system for on-site and machine balancing
Balance according to ISO standards
The program includes various standard rotor types and evaluates the balancing result according to ISO 1940 standard.
Multi-plane balancing The device is capable of performing balancing in one or two planes, allowing for comprehensive balancing settings.Weight distribution for discrete angular positions
The program can calculate the placement and distribution of balancing weights at specified locations (e.g., screws in shaft couplings, fan blades).
Weight summation
The fine balancing result and compensating weights from previous balancing processes can be summed up using the program.
Weight removal or addition
The program can calculate compensating weights for removal or addition. In case of removal, a hole depth calculator is also available.
Automatic certificates and reports
The program automatically generates balancing certificates and reports. ISO standard compliant.
Compensation for auxiliary shaft unbalance
Some rotating parts can only be balanced with auxiliary shafts or stub shafts. The unbalance of these is no longer a problem, as the program can take them into account.
Rotating parts database
The properties of balanced rotating parts can be stored in a rotating part database with separate designations.
Auxiliary shafts database
The unbalance of auxiliary shafts or stub shafts used for balancing individual rotating parts can be stored in a database. Thus, when used, the program can automatically consider the error due to their unbalance.
Balance processes for mass production
The properties of balanced rotating parts are stored in a response matrix form, enabling the calculation of necessary compensating weights for balancing identical rotating parts without the need for trial weights. This greatly facilitates the balancing of identical rotating parts on balancing benches.
Automatic measurement start and data storage
The program automatically starts and finishes measurements during trial and balancing rotations.
Vibration spectrum measurement During on-site balancing, it is useful to know if the machine has other faults, and whether it is worth balancing at all. Moreover, it is advisable to perform vibration analysis after balancing to ensure that the machine is in an operable state. For this task, the X-Balancer+ has vibration spectrum measurement capability - in a very wide frequency range from 1 Hz up to 12800 Hz. The spectrum resolution and frequency range are adjustable, the spectra can be visually displayed, and even transferred to balancing reports. Resonance search function This is a method for identifying the mechanical resonances of machines and their associated speeds. It involves continuous measurement of the vibration vector (vibration level and phase angle) while gradually decreasing the machine speed. The results can be viewed in graphs showing the vibration level and phase angle as a function of speed. From these, resonances and critical speeds can be determined. (Note: Do not operate the machine at resonance speed, as it will quickly fail.)Due to physical reasons, balancing cannot be performed at resonance speed.) Battery and charging The X-Balancer+ has a huge battery capacity, allowing you to work continuously for a whole day without recharging. Thanks to the fast charger, recharging to 80% of the battery capacity takes only 2 hours. At the same time, the instrument is capable of providing very precise information about the battery capacity and warning about the need for recharging. Intelligence and protection The X-Balancer+ offers a range of intelligent functions and impressive accuracy to protect the user from wrong decisions and prevent machine failure. Considering the often harsh industrial conditions, the instrument is rugged, with an IP65 industrial protection rating.Channels
Two measuring channels are available for various sensors, such as vibration acceleration, vibration velocity, or displacement sensors. The channels provide a 4 mA constant current output (max. 24 V) for driving ICP vibration sensors, while the speed input can accept 0.5 ... 24 V rotation transducers.
Vibration level and phase angle measurement
During balancing, a digitally synchronized filter operates at a speed. This way, other vibration noise occurring during balancing affects the measurement accuracy by less than 1%. Balancing can be performed in the speed range of 30 ... 180,000 revolutions per minute.
USB-C and Bluetooth communication
A USB-C interface provides communication between the PC and the X-Balancer+ instrument. The instrument can also be wirelessly controlled with a notebook, tablet, or smartphone via Bluetooth.
External dimensions and weight
External dimensions: 215 x 46 x 150 mm Weight: 700 grams
Balancing software:
Executable under Windows 7/8/10/11, as well as on Android (as an application). The required hardware conditions are minimal, as the measurement and calculation are done directly on the instrument.
Price category: net 2.8 - 2.85 million HUF Shipping: immediately from stock(For current prices and stock availability, please inquire by phone or email. We are happy to assist with your selection.)
No further information available.
Copyright © PIM Professzionális Ipari Méréstechnika Kft.
2026 | Minden jog fenntartva
Impresszum | Adatkezelés
Home » Product Range » Nem kategorizált » -15 » VMI X-Balancer+ balancer instrument